BestSonicBath works as a retainer pod manufacturer and a retainer cleaner factory for clinics, dental wholesalers and private-label programs. Our BSB-H200P2 dental pod pairs 30W ultrasonic cleaning with a separate UVC cycle rated up to 99.8%, and every order is quoted around your logo, packaging, manual and kit configuration rather than a fixed retail box.
Most quotations for a retainer cleaner look similar on the first page. The difference shows up later, when artwork, packaging or a test result needs a decision — and that is where the sourcing route matters.
Buyer decision: before you compare price, ask who assembles the unit and who signs off on the function test. That single question separates a factory quotation from a reseller quotation.
The unit behind every wholesale conversation. These are the figures published for the retainer ultrasonic dental pod with UVC — use them to build your own listing or tender document.
| Model No. | BSB-H200P2 |
|---|---|
| Ultrasonic power | 30W, described on the product page as one third higher power than comparable units |
| Tank capacity | 250 ml as listed in the features section / 200 ml as listed in the description section |
| Tank depth | 53 mm |
| Sterilization rate | Up to 99.8% with UVC |
| Overheat protection | Continuous operation beyond 20–30 minutes triggers an automatic stop so the PCB can cool |
| Water protection | Auto shut-off when the tank is without water |
| Sales channel | The pod is not permitted for sale on e-commerce platforms; it is positioned for clinics and dental wholesalers |
The product page states both 250 ml and 200 ml for tank capacity. Decide which figure your packaging and manuals should carry, and confirm it in writing before artwork is finalised — a mislabelled carton is the most expensive mistake in a private-label run.
Wholesale buyers rarely sell on tank size alone. In clinics and retail conversations, these are the two behaviours that customers actually notice.
The UVC cycle is independent of the ultrasonic cleaning cycle and keeps working when there is no water in the tank. That separation is what allows the pod to sterilize between full cleanings, and it is the basis of the sterilization rating.
Buyer decision: if your customers store aligners dry between uses, lead with the UVC step as the daily hygiene habit and the ultrasonic cycle as the deeper clean.
The pod shuts itself off when the tank runs without water, and it stops automatically after a long continuous session so the electronics can cool. Both behaviours reduce the returns that come from customers leaving a cleaner running unattended.
Buyer decision: demo both safety behaviours during clinic staff training — they are the fastest answer to "what if a patient forgets it?"
OEM and ODM customization is offered for wholesale clients. The table below shows what can be tailored, and what has to be confirmed before a run is scheduled.
| Customization area | Options to discuss | Notes |
|---|---|---|
| Logo & branding | Brand mark applied to the pod body and to the outer carton | Artwork files and print positions confirmed at quotation stage |
| Packaging | Retail carton, clinic bulk carton, market-specific outer labelling | Share label requirements before pricing is issued |
| User manual | Customized manual content, language variants, branded cover | Final text approved by your own regulatory contact |
| Kit configuration | Pod, brush-cover accessory, cable and printed insert bundled to your listing | Kit contents are locked together with the packaging run |
| Cleaning cycle configuration | Ultrasonic and UVC cycle settings discussed against your target market | Available for confirmation; settings are finalised with production |
| Distribution format | Clinic-ready and dental-wholesaler bundles | E-commerce resale is not permitted for this pod |
Buyer decision: bring your artwork, manual text and kit list to the first quotation conversation. Items confirmed late push the whole packaging run, not just one line item.
Every BSB-H200P2 order moves through the same five stages, with the product's own safety behaviours used as checkpoints along the way.
Transducers, tanks, boards and housings are received and checked against the approved sample before assembly begins.
Units are built to the agreed configuration for that run, including logo, kit contents and carton.
Each unit is checked for waterless auto shut-off and for a UVC cycle that runs independently of the ultrasonic cycle.
Continuous-session units are checked against the auto-stop behaviour to confirm the electronics cool as intended.
Retail or bulk cartons are sealed, inserts matched to the approved manual, and a batch record kept for the run.
Test parameters, batch sizes and report formats are agreed with your account manager when the order is set up, so the checkpoints match what your buyers or auditors expect to see.
Tell us who you sell to and the quotation can start from the right configuration instead of the standard box.
| Buyer scenario | What matters most | Configuration to discuss | Next step |
|---|---|---|---|
| Orthodontic clinic chain | Fast turnaround between patients and a credible hygiene story | Clinic-ready bundles with a staff-training manual | Request a quote with your clinic volume |
| Dental wholesaler / distributor | A repeatable specification and packaging that travels well | Bulk cartons, market-specific labelling, brand mark | Share target markets and annual volumes |
| Private-label brand in clinic and retail channels | A distinct look without changing the core unit | Custom logo, retail carton, customized manual | Confirm artwork and kit contents first |
| Denture and night-guard specialists | Coverage for larger appliances | Specify the 53 mm deep tank configuration | Ask for a sample unit to test |
| Baby-care accessory sellers | Cleaning teats and small items in the same unit | Kit configuration including the matching accessories | Confirm which accessories belong in the kit |
Retainer pod and retainer cleaner orders are quoted per program. These are the four questions to raise in the first exchange.
All commercial figures are issued in writing for your specific configuration. Nothing in this overview replaces the quotation you receive for your own run.
Tell us your market, volume and customization requirements. We will quote the BSB-H200P2 against your own configuration, packaging and manual.
Keep adjacent product options together for a faster catalog comparison.
Direct factory wholesale for bulk orders of our ultrasonic retainer cleaner. Professional aligner cleaner and dental pod solutions for medical facilities.
View product
The dental tablets are used to clean varies of bacterias from oral appliance, such as invisalign,aligner,retainer,denture,mouth guard. It keep dental appliances fresh and long life
View product
Best Sonic Bath industrial ultrasonic cleaner with 500L capacity and filtration system provides efficient and powerful cleaning for large parts and engines.
View productorders for the bsb-h200p2 dental pod are quoted as oem/odm programs, with customization, packaging and function confirmation handled against the production run rather than passed through an intermediary. raise any documentation your procurement process requires during the quote conversation.
the pod runs at 30w ultrasonic power with uvc sterilization rated up to 99.8%. it has a 53 mm deep tank, auto shut-off when the tank is without water, and overheat protection that stops the unit after 20–30 minutes of continuous operation so the pcb can cool.
the product page states 250 ml in the features section and 200 ml in the description section. confirm which figure your packaging, manuals and listing should carry before artwork is finalised.
yes. the pod is protected against damage when the tank is without water and shuts off automatically, and the uvc sterilization cycle continues to work with an empty tank. ultrasonic cleaning itself is carried out with water in the tank.
the product page states that the pod is not permitted for sale on e-commerce platforms. it is positioned for clinics and dental wholesalers to distribute, so tell us your market and channel during the quote discussion.
send your target market, expected volume and the customization you need — logo, packaging, manual and kit contents. a written quotation is issued for that configuration, and sample availability and lead time are confirmed at the same time.
